Fiber Optic media converter and amplifier, DL-LWV
The fiber optic system DL LWV works as amplifier and media converter for several fiber optic transmission networks.
Less optical power requires amplification. Different fiber types within one application need conversion. The system DL LWV offers various possibilities, corresponding to these requirements.
Product variants
| Article Number | Product Name | |
|---|---|---|
| 01000531131 + | DL-LWV/08-MM-ST/13-SM-ST LWV/with carrier signal | + Request quote |
| DL-LWV media converter and amplifier, MM-ST <> SM-ST with carrier signal | ||
| 01000522333 + | DL-LWV/13-MM-SC/13-SM-SC LWV/without carrier signal | + Request quote |
| DL-LWV media converter and amplifier, MM-SC <> SM-SC without carrier signal | ||
| 01000522131 + | DL-LWV/13-MM-ST/13-SM-ST LWV/without carrier signal | + Request quote |
| DL-LWV media converter and amplifier, MM-ST <> SM-ST without carrier signal | ||
| 01000541131 + | DL-LWV-120MB/08-MM-ST/13-SM-ST/120MB LWV/without carrier signal | + Request quote |
| DL-LWV media converter and amplifier, 120MB MM-ST <> 120MB SM-ST without carrier signal | ||
| 01000xxxxxx + | DL-LWV media converter and amplifier, custom specific | + Request quote |
| DL-LWV media converter and amplifier based on customer specification | ||
Description
The fiber optic system DL-LWV works as amplifier and media converter for several fiber optic transmission networks.
Less optical power requires amplification. Different fiber types within one application need conversion. The system DL-LWV offers various possibilities, corresponding to these requirements.
The system contains fiber optic receiver and transmitter components. The incoming signal is electrically processed and then coupled back into the fiber optic cable via the transmitter. With the aid of this intermediate amplifier the line length is unlimited using various fiber types as for instance: POF, HCS, multimode or singlemode fiber optic cable.
LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Please note that the adjoining chart just covers a small selection of our product range. In general, any combination of fiber type, wavelength and bandwidth is available. The columns are marked with F1 up to F16 for the types of fiber.
Specifications
- Industrial media converter:
- DIN-rail mounting
- FO connector:
- SC, ST or E2000
- Fiber type:
-
- multimode 62,5/125µm
- multimode 50/125µm
- singlemode 9/125µm
- Optical budget:
-
- multimode | 8 dB (4,2 dB)
- singlemode | 17dB
- FO range:
-
- multimode | 2600 m (1400 m) (3 dB/km)
- singlemode | 30 km (0,4 dB/km)
- Wavelength:
-
- multimode | 850 nm
- singlemode | 1310 nm
- Data rate:
-
- multimode | 120 MBit/s
- singlemode | 120 MBit/s
- Transmission:
- full duplex
- Status LEDs:
- Power supply (green) / Data receive (yellow) / Status (red)
- Power supply:
- 12-30 VDC, other voltages on request
- Power consumption:
- 200mA
- Operating temperature:
- -10°C to +55°C
- Storage temperature:
- -40 °C to +85 °C
- EMC:
- DIN EN 55032:2016-02 - Class A / DIN EN 61000-6-2:2006-03
- Weight:
- 500 g
- Dimensions:
- W: 60 mm, H: 120 mm, D: 110 mm
- Housing:
- Stainless steel, powder-coated / IP 20