010006431
MODBUS-Plus naar Singlemode omvormer, DL485-MBP
De DL485-MPB is een MODBUS-Plus naar singlemode glasvezel omvormer voor een point-to-point verbinding.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
010006431 + | DL-485-MBP/13-SM-ST MBP/SM/PzP | + Vraag offerte aan |
DL-485-ST, MODBUS-Plus omvormer voor een point-to-point verbinding via Single mode glasvezel. | ||
010006433 + | DL-485-MBP/13-SM-SC MBP/SM/PzP | + Vraag offerte aan |
DL-485-SC, MODBUS-Plus omvormer voor een point-to-point verbinding via Single mode glasvezel. | ||
010006433-BIDI-A + | DL-485-MBP/13-SM-SC-BIDI-A MBP/SM/PzP | + Vraag offerte aan |
DL-485-SC-BIDI-A, MODBUS-Plus omvormer voor een point-to-point verbinding via Single mode glasvezel. | ||
010006433-BIDI-B + | DL-485-MBP/13-SM-SC-BIDI-B MBP/SM/PzP | + Vraag offerte aan |
DL-485-SC-BIDI-B, MODBUS-Plus omvormer voor een point-to-point verbinding via Single mode glasvezel. | ||
010006435 + | DL-485-MBP/13-SM-E2-BIDI-B MBP/SM/PzP | + Vraag offerte aan |
DL-485-E2000, MODBUS-Plus omvormer voor een point-to-point verbinding via Single mode glasvezel. |
Beschrijving
The fiber optic systems DL485-MBP connect a Modbus-Plus interface to optical field bus networks. With the help of this innovative system optical bus, star, tree and mixed structures are possible.
LEDs and potential-free contacts (optional for DL485-MBP) of a fault detector relay are able to signal defective states.
Specificaties
- FO-connector:
- ST, SC, E2000 or SC-BIDI
- Fiber type:
- Singlemode 9/125µm
- Optical budget:
- 16 dB
- FO range:
- 30 km, others up to 100 km on request (0,3 dB/km)
- Wavelength:
- 1310 nm (1310/1550 nm for BIDI version)
- Data rate:
- 1 MBit/s
- Transmission type:
- Half duplex
- Signal delay:
-
- MODBUS Plus Interface <> LWL: < 400 ns / Tx <> Rx: 500 ns
- MBPR: MODBUS Plus Interface <> LWL : < 1 μs
- Terminating resistor:
- Acc. to MODBUS Plus specification there are no terminating resistors
- RS485 cable length:
- 50m
- RS485 connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red)
- Power supply:
- 5 Watt, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> RS485)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated