Analoog en/of digitaal naar POF vezel omvormer, IOL3000
De IOL3000 modules kunnen maximaal 8 digitale signalen (12-24 VDC) en/of 4 analoge signalen (0-10 V of 0-20 mA, digitaal via een A/D-omzetter met een resolutie van 10 bit binnen een point-to-point structuur of lijn-structuur via POF (Plastic Optical Fibre) glasvezel versturen. De ontvanger module met 8 uitgangen komt in twee versies, met relais (IR toegevoegd op de artikelcode) of met een transistor uitgangen.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 030001101 and 030002101 + | IOL-3000/TX-4A-V-13-POF-ST Transmitter + Receiver/24V/4xA/POF/ST | + Vraag offerte aan |
| IOL3000, 4x analoog 0-10V, Transmitter + Receiver, ST, via POF fiber optic | ||
| 030001201 and 030002201 + | IOL-3000/8D4A-V-13-POF-ST Transmitter + Receiver/24V/8xD/4A/POF/ST | + Vraag offerte aan |
| IOL3000, 8x digitaal + 4x analoog 0-10V, Transmitter + Receiver, ST, via POF fiber optic | ||
| 030001301 and 030002301 (IR) + | IOL-3000/8D-13-POF-ST Transmitter + Receiver/24V/8xD/TX/POF/ST | + Vraag offerte aan |
| IOL3000, 8x digitaal, Transmitter + Receiver, ST, via POF fiber optic | ||
| 030001401 and 030002401 + | IOL-3000/8D4A-A-13-POF-ST Transmitter + Receiver/24V/8xD/4A/POF/ST | + Vraag offerte aan |
| IOL3000, 8x digitaal + 4x analoog 0-20mA, Transmitter + Receiver, ST, via POF fiber optic | ||
| 030001501 and 030002501 + | IOL-3000/TX-4A-A-13-POF-ST Transmitter + Receiver/24V/4xA/POF/ST | + Vraag offerte aan |
| IOL3000, 4x analoog 0-20mA, Transmitter + Receiver, ST, via POF fiber optic | ||
Beschrijving
The fiber optic system IOL3000 transmits digital signals (e.g., contact closures, control-signals) and analog signals via fiber optics.
The fiber optic system is able to transmit up to 8 digital signals (12–24 VDC) and/or 4 analog signals (0–10 V or 0–20 mA, digitalized via A/D converter with a resolution of 10 Bit) within a point-to-point structure or line-structure.
The interconnection of an input/pass system (ED) allows the transmission of additional digital and analog data. You can choose if you want to have an electric disjunction (OR) of electrically and optically received data or if the electric data shall overwrite the optical data. In case of analog data the DIP switch must be used to decide whether the optical or the electrical signals shall be transmitted. The devices are available for line or ring structures as one fiber solutions.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
Specificaties
- FO-connector:
- ST
- Fiber type:
- POF 980/1000µm
- Optical budget:
- POF 12dB
- FO range:
- POF 50m (180 dB/km)
- Wavelength:
- POF 650nm
- Accuracy receiver:
- 0,2%
- Cable lenght:
- 1m
- Connector:
- 16-pole terminal
- Status-LEDs:
- Power supply (green) / Data (yellow) / Status (red)
- Power supply:
- 12 - 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500VDC
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing
- Stainless steel, powder coated