01000 2131

RS422 naar singlemode glasvezel omvormer, DL422

De DL422 is een RS422 4-draads naar singlemode glasvezelconverter voor point-to-point verbindingen. Voor adapter kunt u de keuze maken tussen ST, SC, E2000 of SC-BIDI. BIDI-technologie betekent dat u slechts één glasvezel nodig heeft voor het verzenden en ontvangen van de gegevens.

Lees meer

Product varianten

Artikelnummer Productnaam
01000 2131 + DL-422/13-SM-ST RS422/MM/PzP/FiberView + Vraag offerte aan
DL422-ST, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel
01000 2133 + DL-422/13-SM-SC RS422/MM/PzP/FiberView + Vraag offerte aan
DL422-SC, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel
01000 2133-BIDI-A + DL-422/13-SM-SC-BIDI-A RS422/MM/PzP + Vraag offerte aan
DL422-SC-BIDI-A, RS422 4-wire omvormer voor point-to-point verbindingen over singlemode glasvezel (te bestellen in combinatie met BIDI-B)
01000 2133-BIDI-B + DL-422/13-SM-SC-BIDI-B RS422/MM/PzP + Vraag offerte aan
DL422-SC-BIDI-B, RS422 4-wire omvormer voor point-to-point verbindingen over singlemode glasvezel (te bestellen in combinatie met BIDI-A)
010002135 + DL-422/13-SM-E2000 RS422/MM/PzP/FiberView + Vraag offerte aan
DL422-E2000, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel

Beschrijving

The fiber optic systems DL422 connect applications with a RS422 4-wire interface via fiber optics. With the help of this innovative system optical bus, star, tree and mixed structures are possible. LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.

Specificaties

Data rate:
Point-to-point structure: 1.5 MBit/s max. / Line topology: 1.5 MBit/s divided by no. of DL422 systems
Transmission type:
Duplex
FO-connector:
ST, SC, E2000 or SC-BIDI
Fiber type:
Singlemode 9/125µm
Optical budget:
16 dB
FO range:
30 km, others up to 100 km on request (0,3 dB/km)
Wavelength:
1310 nm (1310 nm 1550 nm for BIDI)
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length:
50 m
RS422 Connector:
9-pole Sub-D female and 6-pole terminal
Status-LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12 - 30 VDC, other voltages on request
Power consumption:
5 Watt, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> RS422)
Operating temperature:
-40°C to +70°C (Multimode and Singlemode with ST or SC), -20°C to +55°C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight
570 g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing:
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?