030001135 and 030002135

Analoog en/of digitaal naar SM glasvezel omvormer, IOL3000-E2000

Met de IOL3000 modules kunnen maximaal 8 digitale signalen (12-24 VDC) en/of 4 analoge signalen (0-10 V of 0-20 mA, digitaal, via een A/D-omzetter met een resolutie van 10 bit, versturen binnen een punt-naar-punt structuur of lijnstructuur via singlemode glasvezel met E2000 aansluiting. De ontvanger module is leverbaar in twee versies, met relais (IR toevoegen bij de artikelcode) of met een transistor uitgang.

Lees meer

Product varianten

Artikelnummer Productnaam
030001135 and 030002135 + IOL-3000/TX-4A-V-13-SM-E2000 Transmitter + Receiver/24V/4xA/SM/E2000 + Vraag offerte aan
IOL3000, 4x analoog 0-10V, Transmitter + Receiver, E2000, via singlemode fiber optic
030001235 and 030002235 + IOL-3000/8D4A-V-13-SM-E2000 Transmitter + Receiver/24V/8xD/4A/SM/E2000 + Vraag offerte aan
IOL3000, 8x digitaal + 4x analoog 0-10V, Transmitter + Receiver, E2000, via singlemode fiber optic
030001335 and 030002335 (IR) + IOL-3000/8D-13-SM-E2000 Transmitter + Receiver/24V/8xD/TX/SM/E2000 + Vraag offerte aan
IOL3000, 8x digitaal, Transmitter + Receiver, E2000, via singlemode fiber optic
030001435 and 030002435 + IOL-3000/8D4A-A-13-SM-E2000 Transmitter + Receiver/24V/8xD/4A/SM/E2000 + Vraag offerte aan
IOL3000, 8x digitaal + 4x analoog 0-20mA, Transmitter + Receiver, ST, via singlemode fiber optic
030001535 and 030002535 + IOL-3000/TX-4A-A-13-SM-E2000 Transmitter + Receiver/24V/4xA/SM/E2000 + Vraag offerte aan
IOL3000, 4x analoog 0-20mA, Transmitter + Receiver, ST, via singlemode fiber optic

Beschrijving

The fiber optic system IOL3000 transmits digital signals (e.g., contact closures, control-signals) and analog signals via fiber optics.

The fiber optic system is able to transmit up to 8 digital signals (12–24 VDC) and/or 4 analog signals (0–10 V or 0–20 mA, digitalized via A/D converter with a resolution of 10 Bit) within a point-to-point structure or line-structure.

The interconnection of an input/pass system (ED) allows the transmission of additional digital and analog data. You can choose if you want to have an electric disjunction (OR) of electrically and optically received data or if the electric data shall overwrite the optical data. In case of analog data the DIP switch must be used to decide whether the optical or the electrical signals shall be transmitted. The devices are available for line or ring structures as one fiber solutions.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

Specificaties

FO-connector:
E2000
Fiber type:
Singlemode 9/125μm
Optical budget:
16 dB
FO range:
30 km, others up to 100 km on request (0,3 dB/km)
Wavelength:
1310 nm (1310/1550 nm for BIDI version)
Accuracy receiver:
0,2%
Cable lenght:
1m
Connector:
16-pole terminal
Status-LEDs:
Power supply (green) / Data (yellow) / Status (red)
Power supply:
12 - 30 VDC, other voltages on request
Power consumption:
5 Watts, 200 mA (24 V)
Galvanic isolation:
500VDC
Operating temperature:
-40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight:
570 g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?