4TX-1FX poort unmanaged Ethernet switch met singlemode glasvezel, EL100-REG
De productlijn e-light REG bestaat uit industriële Ethernet switches die Fast Ethernet ondersteunen. Hun behuizing is gebouwd volgens de DIN 43880 en kan dus flexibel worden gemonteerd in schakel- of verdeelkasten. De EL100-REG 1 of 2 singlemode (SM) glasvezel poorten en 2 of 4 RJ45 TX-poorten.
|0490401000053EV00-00 +||EL100-REG/4x10/100TX-1x100FX-SM-SC (Extended)||+ Vraag offerte aan|
|5 port unmanaged Ethernet switch, 4x Tx + 1x Fx singlemode fiber optic|
|04900201005353EV00-00 +||EL100-REG/2x10/100TX-2x100FX-SM-SC (Extended)||+ Vraag offerte aan|
|4 port unmanaged Ethernet switch, 2x Tx + 2x Fx singlemode fiber optic|
The product series e-light REG consists of industrial basic switches that support Fast Ethernet. Their housing is build according to DIN 43880 and thus they can flexibly be mounted in either switch cabinets or distribution boards.
The interface can be used for singlemode, multimode, HCS or POF fibers and distances of up to 30 km can be reached. Further features are Auto-Negotiation, MDI/MDI-X and a wide temperature range. The redundant power supply has got 12 to 60 VDC. Its status as well as the network status can be seen from the LEDs on the front panel.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
In connection with other systems out of the e-light and DragonLine series respectively, individual applications can be realized.
- Fiber type:
- Singlemode 9/125μm
- Optical budget:
- 16 dB
- FO range:
- 30 km, others up to 100 km on request (0,3 dB/km)
- 1310 nm
- No. of FX ports
- 1 / 2
- No. of TX ports
- 2 / 4
- TX port:
- 1 x RJ45 / Auto-Negotiation / Auto MDI/MDI-X / Supports length up to 100 m (CAT 6)
- IEEE 802.3 10Base-T Ethernet / IEEE 802.3u 100Base-TX und 100Base-FX Fast Ethernet
- LED indication:
- Power (green/red) / error (red) / Status (green) / full duplex (green) / receiving data (yellow) / FiberView (red/yellow/green)
- Power supply:
- 12–60 VDC
- Failure relay:
- 60 VAC (1 A) / 60 VDC (1 A)
- Power consumption:
- 5,3 Watts, 220 mA (24 V)
- Galvanic isolation:
- 500 VDC
- Operating temperature:
- –40 °C – +55 °C
- EN61000-6-2 / EN55022 Class A
- 300 g
- 78 x 107 x 90 mm
- 6 TE
- Polyamid (PA 6/6.6)