01500 931

Glasvezel optische bypas, x-light 9SM

De x-light zorgt voor de continuiteit van de datacommunicatie bij een apparaatstoring in singlemode 9/125μm glasvezelnetwerken. De units werken fabrikant en protocol onafhankelijk in lijn- of redundante ringtopologie netwerken. De x-lamp wordt geactiveerd zodra het spanningsniveau lager is dan het aangepaste spanningsniveau. Het kan ook worden geactiveerd via de triggeringang in geval van onderhoud of vervanging van een defect netwerkapparaat.

Lees meer

Product varianten

Artikelnummer Productnaam
01500 931 + x-light 9 SM ST + Vraag offerte aan
x-light glasvezel optische bypass met ST adapter, 9/125µ singlemode
01500 933 + x-light 9 SM SC + Vraag offerte aan
x-light glasvezel optische bypass met SC adapter, 9/125µ singlemode
01500 934 + x-light 9 SM LC + Vraag offerte aan
x-light glasvezel optische bypass met LC adapter, 9/125µ singlemode
01520 931 + x-light-2 9 SM ST + Vraag offerte aan
x-light-2 fiber optic optical bypass with ST adapter, 9/125µ singlemode
01520 933 + x-light-2 9 SM SC + Vraag offerte aan
x-light-2 fiber optic optical bypass with SC adapter, 9/125µ singlemode
01520 934 + x-light-2 9 SM LC + Vraag offerte aan
x-light-2 fiber optic optical bypass with LC adapter, 9/125µ singlemode


x-light ensures a safe communication even in case of device failure by optically bypassing the defective node so that a permanent data transmission is guaranteed. x-light is manufacturer and protocol independent so that it perfectly integrates into every network, regardless of the structure (ring or line). x-light is activated once the voltage is lower than the adjusted voltage level. Furthermore, the system can be controlled flexibly via the trigger input, e.g. in case of service or failures. x-light provides highest availability in multi- or singlemode fiber optic networks. Additional features are a high temperature range, a redundant power supply, a cost effective solution because it needs no additional UPS (uninterrupted power supply) and it reduces service costs. The stainless steel housing offers an extremely high degree of flexibility and safety for all kinds of indoor and outdoor applications. It can either be mounted onto a DIN EN rail or fastened onto the wall.


ST, SC or LC
Fiber type:
Singlemode 9/125µm
1310 nm (±40 nm) 1550 nm (±40 nm)
  • x-light-1 ≤ 1,7 dB
  • x-light-2 ≤ 1,5 dB
Durability switch:
10 million
Switching speed:
15 ms max./4 ms typ./4 ms in a temperature range between +5°C and +70°C
Switching type:
non latching
Switch-on delay:
5 s, 10 s, 20 s and/or 40 s, switchable by DIP-Switch
Threshold level:
Between 10 V and 64 V switchable by DIP-Switch (1 V, 2 V, 4 V, 8 V, 16 V and/or 32 V)
2 x 4-pin power supply / 4 pin failure relay and signal input
Status LEDs:
Power (green) / error (red) / ready (green)
Power supply:
10 to 64 VDC
Power consumption:
2,5 Watt
Failure relay:
25 VDC (1 A) / 60 VDC (0,3 A)
Operating temperature:
  • x-light-1 -40°C to +70°C
  • x-light-2 -20°C to +55°C
EN61000-6-2/EN55022 Klasse B (2016-02)
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?