010008271-V3
CAN-bus naar Multimode omvormer, DL-CAN-R
Productgroep
De DL-CAN-R-modules verbinden CAN veldbusnetwerken (bijv. CAN, CANopen, DeviceNet) via multimode glasvezelmet elkaar. Met behulp van dit innovatieve systeem is een optisch redundant ringnetwerk mogelijk.
Opmerking:
De 0100075xx serie is vervangen door de 0100084xx serie en niet compatibel. Wanneer je een bestaande installatie met 0100075xx modules wilt uitbreiden, neem dan contact op met support.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 010008271-V3 + | DL-CAN-R/13-MM-ST CAN/MM/Ring | + Vraag offerte aan |
| CAN-bus to Multimode converter for a redundant ring network, ST adapter. | ||
| 010008273-FV-V3 + | DL-CAN-R/13-MM-SC CAN/MM/Ring | + Vraag offerte aan |
| CAN-bus to Multimode converter for a redundant ring network, SC adapter. | ||
| 010008273-BIDI-V3 + | DL-CANR/2x13-MM-SC-BIDI CAN/MM/Ring | + Vraag offerte aan |
| CAN-bus to Multimode converter for a redundant ring network, SC-BIDI adapter. | ||
Beschrijving
The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
Specificaties
- FO-connector:
- ST, SC or SC-BIDI
- Fiber type:
- Multimode 62,5 (50)/125µm
- Optical budget:
- 12 dB
- FO range:
- 5 km (1 dB/km)
- Wavelength:
- 1310 nm (1310/1550 nm for BIDI version)
- Data rate:
- 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
- Transmission type:
- Half duplex
- Indentifier:
- 11 Bit, 29 Bit or both
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- CAN cable length:
- Acc. to CAN Specification
- CAN connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> CAN)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated