CAN-bus naar POF of HCS fiber optic omvormer, DL-CAN-R

De DL-CAN-R modules verbinden CAN-veldbusnetwerken (bijv. CAN, CANopen, DeviceNet) via POF (Plastic Optical Fibre) of HCS (Hard Clad Silica) glasvezel met elkaar. Het speciale multifunctionele optische vezelsysteem DL CAN-R maakt het realiseren van optische ringstructuren mogelijk.

Lees meer

Product varianten

Artikelnummer Productnaam
010007551 + DL-CAN/1x13-POF-ST CAN/POF/Ring + Vraag offerte aan
CAN-bus naar POF fiber optic omvormer foor een redundant ring netwerk, ST adapter.
010007562 + DL-CAN/1x13-HCS-ST CAN/HCS/Star + Vraag offerte aan
CAN-bus naar HCS fiber optic omvormer foor een redundant ring netwerk, ST adapter.


The DL CAN systems connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.


Fiber type:
POF 980/1000µm/HCS200/230µm
Optical budget:
12 dB
FO range:
POF 50m (180 dB/km) / HCS 200m (180 dB/km)
POF 650nm / HCS 850nm
Data rate:
10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
Transmission type:
Half duplex
11 Bit, 29 Bit or both
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
CAN cable length:
Acc. to CAN Specification
CAN connector:
9-pole Sub-D female and 6-pole terminal
Status LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12 to 30 VDC, other voltages on request
Power consumption:
5 Watts, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> CAN)
Operating temperature:
-40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
EN61000-6-2/EN55022 Class B + A1 + A2
570 g
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?